DST-2 realizes more accurate diagnosis through CAN communication that speed is 50 times faster than conventional.
Easy operation on LCD display with touch panel
5.7inch full color display with touch panel assists an easier operation.
Voltmeter and Oscilloscope
Not only communication basis disgnosis [Diagnostic code, ECU data monitor, Active test], but also voltmeter and oscilloscope detect alteration in the electric signal to find out the troubling part.
Data recording to your PC
Saved data such as data-list can be downloaded to your PC.
DST-2 Main Unit
Items
Specification
Dimensions
145mm (W) x 223mm (H) x 71mm (D)
Weight
Approx. 1380g
Source voltage
DC10-32V
Power consumption
Normal:7W (12VDC), Charging: 10W (12VDC)
Operation temperature
0~45C
Storage temperature
-10~60C
LCD display
5.7-inch color STN (320x240), transparent type of 256 colors
Adjustable brigthness/contrast
Touch panel
Input: by finger or stylus pen
Key
Four (up, down, two function keys)
Built-in clock
For a time stamp
PC Communication
PC card slot
CFx1ch (CF standard type I, II)
USB
Host: 1ch, Function: 1ch
Serial
1ch (RS-232C)
Vehicle communication
CAN, ISO9141
Back up power supply
Lithium-ion battery 7.4v 1000mAH
Recharge hour (at normal temperature)
Approximate operating time
Approx 5 hours (fully discharge to full charge)
80 minutes (normal operation)
Voltage Measurement Function
Items
Specification
Maximum sampling rate
250s/sec
Input channel
1ch
Voltage range (vertical scale)
1V/div, 2V/div, 5V/div
Time range (horizontal scale)
100ms/div, 200ms/div, 10s/div
Oscilloscope Function
Items
Specification
Maximum sampling rate
500ks/sec
Input channel
2ch
Trigger functions
Mode
Auto, normal, single
Trigger
10%, 50%, and 90% of the monitor
Voltage range (vertical scale)
100mV/div, 200mV/div, 500mV/div~10V/div
Time range (horizontal scale)
5us/div, 100us/div, 200us/div,~10s/div
(200ms and higher is the Roll mode)
